PU鞋材脱模剂

物性
外观：乳白色液体
密度：约0.99g/ml
固体份：25‐29%
PH 值：6.5‐7.5
离子类型：非离子

加入方法
可以在脱模剂加工的任何阶段加入，也可以作为临时助剂添加到脱模剂中。
包装与储存
20kg/桶；5‐35℃避光保存，避免霜冻与高热。

水性PU交联促进剂ACOMA-15A,ACOMA-25A

简介
可加速水的挥发，缩短涂膜指触干时间，提高生产效率及生产良品率。
快速提高涂膜的硬度，快速提高涂膜耐化学品性能。
ACOMA是一种特殊有机聚合物的水性分散体，不含有机溶剂，能快速催化水性中的异氰酸酯与多元醇的反应。
ACOMA完全不同于氮丙啶及碳化二亚胺，是可以直接添加到涂料羟基组分当中，并有良好的稳定性的一种交联促进剂，而非交联剂。

ACOMA-15A
外观:乳白色液体
固体份:27-31%
乳液类型:非离子型
PH值:6.5-7.5
不含APEO

ACOMA-25A
外观:乳白色液体
固体份:29-34%
乳液类型:非离子型
PH值:6.5-7.5
不含APEO

添加ACOMA后指触干时间
基础配方：丙烯酸多元醇水分散体与Bayer固化剂。
制板方法：钢片，喷涂，干膜厚度为20微米。
放置环境：温度，20 ℃；湿度，68%RH。
测试涂膜指触干时间。

添加ACOMA后硬度上升时间
基础配方：丙烯酸多元醇水分散体与Bayer固化剂。
制板方法：钢片，喷涂，干膜厚度为20微米。
放置环境：温度，20 ℃；湿度，68%RH。
测试涂膜硬度提升到1H所需要时间

添加ACOMA后活化期
基础配方：丙烯酸多元醇水分散体与Bayer固化剂，添加配方1%的ACOMA。
放置环境：温度，25 ℃；湿度，68%RH。
达到设定的时间后进行制板，80度干燥4小后做酒精擦拭试验。
从图中数据可知，加入ACOMA对活化期的影响不明显

ACOMA在水性涂料中的应用

水性体系               适用性   添加量（按配方百分比）      特殊特性
水性羟基聚酯+异氰酸酯     OK       0.2-1.0%              表干，实干时间缩短，硬度增加，耐化性增加
羟基丙烯乳液+异氰酸酯     OK       0.2-1.0%              表干，实干时间缩短，硬度增加，耐化性增加

ACOMA使用方法

添加量:通常建议添加量为配方的0.2－2.0%
如何添加:纯水性时，可以在生产过程中任何时间段加入，当配方中含有机溶剂时，需要在涂料的生产过程最后添加。
使用方法注意事项:与绝大多数的丙烯酸及聚酯元醇有非常好的相溶性，但客户仍需在使用前测试其与配方中各组分的绝对相溶性。

PU自结皮脱模剂
PU release agent for integral skin foam
水性/溶剂型自结皮脱模剂 Hydrophile solvent based release agent for integral skin foam
特点 Features ：
??卓越的脱模性能 superior skills in mold unloading
??实现客户要求的最佳表面效果 achieve the best customer‐ordered surface effect
??优异的二次加工性能（表面再喷涂，粘结，印刷等）
Excellent properties in further processing (surface repainting, cohere, printing )
??有效降低废品率 effectively reduce the rejection rate
??模具更洁净且更易清洁 keep mould cleaner and easy to be washed
??更环保的配方设计，低气味，低或无挥发性溶剂 the formulation design is more
environmental friendly with less odor and almost zero volatile solvent.

产品牌号Productnumber      类型type                                                           适应模温度Optimumtemperature            特点Features
ACOMA-318L               溶剂型，硅蜡混合型Solvent based, siliconewax based    30‐80℃                      通用型，较哑光，与模内漆配套好，综合性能好
                                                                                                                                                         General; quite matte; matches with in‐mould coating; good combination property.
ACOMA-306L               水性，硅蜡混合型Water baed, silicone–wax based         40‐80℃                      通用型，较哑光，与模内漆配套好，特别能有效减少模内漆的脱皮起泡缺陷
                                                                                                                                                          General; quite matte; matches with in‐mould coating;Especially able to effectively reduce the defect of bubbling and peeling in in‐mould coating.
ACOMA-303E               水性，硅蜡混合型Water based, siliconewax based         40‐80℃                     不影响制品二次加工，无需清理即可粘接，上漆，印刷等后加工
                                                                                                                                                        Doesn’t influence the further processing; easy to coherewithout cleaning, painting, printing and any further processing
ACOMA-320H               溶剂型，纯硅型  Solvent based, pure  silicone based.     30‐80℃                     通用型，亮光，综合性能好
                                                                                                                                                          General; luminant; good combaination property.

PU弹性体脱模剂
溶剂型弹性体脱模剂 solvent‐based for PU elastomer foam
应用：空气滤清器，PU脚轮，高强度密封垫，发泡轮胎，汽车减震块，高铁轨道垫
Application: air filter, PU castor, high‐strength sealing gasket,foaming tires, vehicle absobers,high‐speed absorbers.

PU弹性体脱模剂
PU elastomer release agent
溶剂型弹性体脱模剂 solvent based elastomer release agent
特点(properties)：
??卓越的脱模性能 superior skills in mold unloading
??制品表面光洁，无油渍流痕 the surface of the product is smooth without any grease stains.
??有效降低废品率 effectively reduce the rejecting rate
??模具更洁净且更易清洁the mold is easy to keep clean and be washed
??更环保的配方设计，低气味 a more environmental friendly formulation design

产品牌号Productnumber      类型type                                                    适应模温度Optimumtemperature            特点Features
ACOMA-503M              溶剂型，纯硅型Solvent based, puresilicone based.  30‐60℃          应用于滤清器，非常光洁的表面效果
                                                                                                                                      applied for filtering; can create a very smooth effect on the surface
ACOMA-520H              溶剂型，纯硅型Solvent based;silicone based            40‐200℃       应用于PU脚轮，高强度密封垫等，非常光洁的表面效果并有涩手感
                                                                                                                                      Applied for PU castors, high‐strength seal; has an extremely smoothsurface effect and comes with a weird sense of touch.
ACOMA-580M             溶剂型，纯硅型Solvent based;silicone based             40‐150℃       应用于汽车减震块，制品表面干爽不油腻
                                                                                                                                      Applied for vehicle absorbers; the product surface is dry and clean.

PU硬泡脱模剂
release agent for PU rigid foam
硬泡脱模剂 release agent for PU rigid foam
应用：仿木，后备箱盖板，相框，罗马柱，各种保温层
Application: synthetic wood; trunk cover board; marble pillar; and insulating layers

PU硬泡脱模剂
release agent for PU rigid foam
硬泡脱模剂 release agent for PU rigid foam
特点 Features：
??卓越的脱模性能 superior mold unloading properties
??实现客户要求的最佳表面效果 achieve a best customer‐ordered surface effect
??优异的二次加工性能（表面再喷涂，粘结，印刷等）
Excellent properties in further processing (surface repainting, cohere, printing and etc )
??有效降低废品率(effectively reduce the rejecting rate)
??更环保的配方设计，低气味(a more environmental friendly formulation design with les odors )
产品牌号Productnumber      类型type                                                适应模温度Optimumtemperature            特点Features
ACOMA-610L       溶剂型，纯硅型Solvent based;silicone based            30‐60℃         通用型，非常光洁的表面效果，易二次加工。
                                                                                                                              General; excellent and smooth surface effects; easy for furtherprocessing.
ACOMA-616L    水性，纯硅型Water based;silicone based.                  40‐60℃         通用型，非常光洁的表面效果，易二次加工。
                                                                                                                             General; very smooth surface effect; easy for further processing

PU鞋材脱模剂
PU鞋材脱模剂 release agent for PU sole
应用：聚酯型和聚醚型单密度、双密度鞋底，PU雨靴等  Application: PET and PPG single density and double density shoe sole; PU rain shoes and etc

PU鞋材脱模剂 PU release agent for unloading mold
特点 properties：
??卓越的脱模性能 Superior properties in unloading mold
??实现客户要求的最佳表面效果 achieve the best customer‐ordered surface effects
??优异的二次加工性能（表面再喷涂，粘结）excellent properties in further processing  ( surface repainting and cohere)
??有效降低制品表面的流纹缺陷 effectively reduce the defect of the flow liner on the product surface

产品牌号Productnumber      类型type                                                适应模温度Optimumtemperature            特点Features

ACOMA-710M                   溶剂型，纯硅型Solvent based,silicone based 40‐70℃                                             适用于单密度鞋底，非常光洁的表面效果，不油腻，有效减少流纹缺陷。
                                                                                                                                                                     Applied for single density shoe sole. Provide a very smooth surface effects.Non‐ greasy. Effectively reduce the flow liner defects.
ACOMA-718M                   溶剂型，改性硅Solvent based,silicone based  40‐70℃                                             适用于双密度鞋底，层间密着性优异，光洁的表面效果，不油腻，有效减少流纹缺陷。
                                                                                                                                                                     Applied for double density shoe sole, and an advantage of tight layers.Provide smooth surface effects. Non greasy. Effectively reduce the flow liner defects.
ACOMA-736M                 水性Water based                                            40‐70℃                                            适用于单密度鞋底，非常光洁的表面效果，不油腻，有效减少流纹缺
                                                                                                                                                                  Applied for single density shoe sole. Provide a very smooth surface effect. Non greasy. Effectively reduce the defects of flow liner.

橡胶及环氧脱模剂release agent for rubber system & EP system
应用：硫化橡胶片，橡胶密封圈，绝缘子，高压开关等   Application: sulfurized rubber; rubber seal ring; insulator；high‐voltage switches and etc

特点 features：
??耐高温260度，碳化少，无烟 resist high temperature up to 260℃, less carbonation, and less smoke.
??产品表面光泽平整 the product surface is smooth and flat.
??有效降低废品率 effectively reduce the rejecting rate
??更环保的配方设计，低气味 environmentally friendly formulation design

产品牌号Prod uctnumber      类型type                                           适应模温度Optimumtemperature            特点Features
ACOMA-750M                       水性 water based                               50‐250℃                                              适用于硫化橡胶片材，橡胶鞋底片，橡胶密封圈，可稀释100‐200倍
                                                                                                                                                                     Applied in sulfurized rubber, rubber shoe sole, and rubber seal ring. Able to be diluted to 100‐200 times.
ACOMA-720H                       溶剂型solvent  based                          40‐250℃                                               适用于环氧电气的脱模，耐高温，一次喷涂可多次脱模
                                                                                                                                                                   Applied for EP system. And resist high temperature. Can be released multi times at the same painting process